Mode: Selects auto/manual setting. (Auto (automatic optimization) / Manual (The details
are set manually.))
V/H Balance: Sets the vertical (V) and horizontal (H) balance of DETAIL. (-2 (off to the
vertical (V) side) to +2 (off to the horizontal (H) side))
B/W Balance: Selects the balance of the lower DETAIL (B) and the upper DETAIL (W).
(Type1 (off to the lower DETAIL (B) side) to Type5 (off to the upper DETAIL (W) side))
Limit: Sets the limit level of [Detail]. (0 (Low limit level: likely to be limited) to 7 (High limit
level: unlikely to be limited))
Crispning: Sets the crispening level. (0 (shallow crispening level) to 7 (deep crispening
level))
Hi-Light Detail: Sets the [Detail] level in the high intensity areas. (0 to 4)
Copy
Copies the settings of the picture profile to another picture profile number.
MENU
→
(Camera Settings
) →
[Picture Profile]
→
[Copy]
Reset
Resets the picture profile to the default setting. You cannot reset all picture profile settings at
once.
MENU
→
(Camera Settings
) →
[Picture Profile]
→
[Reset]
Note
Since the parameters are shared for movie and still images, adjust the value when you
change the shooting mode.
If you print RAW images with shooting settings, the following settings are not reflected.
Black Level
Black Gamma
Knee
Color Depth
If you change [Gamma], the available ISO value range changes.
There may be more noise in dark parts depending on the gamma settings. It may improve
by setting the lens compensation to [Off].
When using S-Log2 or S-Log3 gamma, the noise becomes more noticeable compared to
when using other gammas. If the noise still is significant even after processing pictures, it
may be improved by shooting with a brighter setting. However, the dynamic range
becomes narrower accordingly when you shoot with a brighter setting. We recommend
checking the picture in advance by test shooting when using S-Log2 or S-Log3.
Setting [ITU709(800%)], [S-Log2] or [S-Log3] may cause an error in the white balance
custom setup. In that case, set the exposure bright first and then perform custom setup.
Setting [ITU709(800%)], [S-Log2] or [S-Log3] disables the [Black Level] setting.
