Although you can change the aperture value during the preview, the subject may be
defocused if you select a brighter aperture. We recommend that you adjust the focus
again.
[180] How to Use
Using shooting functions
Setting the other functions of this product
Shot. Result Preview
The image on the monitor or viewfinder may have an aperture value different from that of the
actual image to be shot. Since the blurring of a subject changes if the aperture is changed,
the blurriness of the actual picture will differ from the image you were viewing prior to
shooting. While pressing down the key to which [Shot. Result Preview] is assigned, you can
check the image preview with the DRO, shutter speed, aperture and ISO sensitivity settings
applied. Check the shooting result preview before shooting.
1. MENU
→
(Custom Settings
) →
[Custom Key Settings]
→ set the
[Shot. Result
Preview] function to the desired key.
2. Confirm the image by pressing the key to which [Shot. Result Preview] was assigned.
Hint
The DRO settings, shutter speed, aperture and ISO sensitivity settings you have set are
reflected on the image for [Shot. Result Preview], but some effects cannot be previewed
depending on the shooting settings. Even in that case, the settings you have selected will
be applied to the images you shoot.
[181] How to Use
Using shooting functions
Setting the other functions of this product
Assigning exposure value adjustment to the control
wheel
By assigning exposure adjustment (aperture and shutter speed) to the control wheel in
advance, you can adjust the value by turning the control wheel when the screen is in
shooting mode. This allows you to quietly adjust the value while shooting movies.
1. MENU
→
(Custom Settings
)→
[Custom Key Settings]
→
[Control Wheel]
→ select
[Aperture] or [Shutter Speed].