on the TV, while the recorded image and the shooting information are displayed on the
camera’s monitor.
[219] How to Use
Changing settings
Setup menu
TC Output (movie)
Sets whether or not to layer the TC (time code) information on the output signal via the
HDMI terminal when outputting the signal to other professional-use devices.
This function layers the time code information on the HDMI output signal. The product sends
the time code information as digital data, not as an image displayed on the screen. The
connected device can then refer to the digital data to recognize the time data.
1. MENU
→
(Setup
) →
[HDMI Settings]
→
[
TC Output]
→ desired setting.
Menu item details
On:
Time code is output to other devices.
Off:
Time code is not output to other devices.
Note
When [
TC Output] is set to [On], the image may not be output properly to the TV or
recording device. In such cases, set [
TC Output] to [Off].
[220] How to Use
Changing settings
Setup menu
REC Control (movie)
If you connect the camera to an external recorder/player, you can remotely command the
recorder/player to start/stop recording using the camera.
1. MENU
→
(Setup
) →
[HDMI Settings]
→
[
REC Control]
→ desired setting.
Menu item details
On:
