Sony 4-113-168-11(2) Operating Instructions Manual Download

Page: 42 / 76

ICD-BX700 4-113-168-11(2)

To record the sound of the IC recorder

with other equipment, connect the



(headphone) jack of the IC recorder

to the audio input connector (minijack,

stereo) of other equipment using an

audio connecting cable*.

Connect the



(headphone) jack

of the IC recorder to the audio

input connector (stereo minijack)

of other equipment using an audio

connecting cable*.

Press



PLAY/STOP•ENTER to start

playback and at the same time set

the connected equipment to the

recording mode.

A message from the IC recorder

will be recorded on the equipment

connected.

Press



(stop) on the IC recorder

and the connected equipment at

the same time to stop recording.

* Optional audio connecting cables (not

supplied)

To the IC

recorder

To the other

equipment

RK-G139

Stereo

mini-plug

Mini-plug

(monaural)

RK-G136

Stereo

mini-plug

Stereo

mini-plug

Note

Your dealer may not handle some of the above

listed optional accessories. Please ask the

dealer for detailed information.

Tip

Before you start recording, we recommend

you to make trial recording first.





Summary of Contents for 4-113-168-11(2)













































































Search results

Summary of Contents for 4-113-168-11(2)

Reviews:

Related manuals for 4-113-168-11(2)

Brands by name

Popular brands

Sony 4-113-168-11(2), Operating Instructions Manual

Search results

Summary of Contents for 4-113-168-11(2)

Reviews:

Related manuals for 4-113-168-11(2)

Brands by name

Popular brands