Sony 4-113-168-11(2) Operating Instructions Manual Download

Page: 63 / 76

ICD-BX700 4-113-168-11(2)

Tro

tin

Symptom

Remedy

The operation indicator

does not light.

“LED” is set to “OFF” (page 61). Display the menu and set “LED”

to “ON.”



“FULL” is displayed and you

cannot start recording.

The memory is full. Erase some of the messages (page 47).



“FULL” is displayed and

you cannot operate the IC

recorder.

99 messages have been recorded in the selected folder or

495 messages (when there are 5 folders) in total have been

recorded. Therefore you cannot record another message, or

move a message. Select another folder (page 23), or erase

some of the messages (page 47).



Recording is interrupted.

The VOR function (page 25) is activated. Set “VOR” to “OFF” in

the menu (page 58).



Noise is heard.

An object, such as your finger, etc., accidentally rubbed or

scratched the IC recorder during recording so that noise was

recorded.
The IC recorder was placed near an AC power source, a

fluorescent lamp or a mobile phone during recording or

playback.
Plug of the connected microphone was dirty when recording.

Clean the plug.
The



(headphones) plug is dirty. Clean the plug.

Noise may be heard during VOR recording.
Noise may also be heard at the point where you add a

recording or overwrite a recording.



Recording level is low.

“SENS” (microphone sensitivity) is set to “

.”

Display the menu and set “SENS” to “

” (page 24).



Summary of Contents for 4-113-168-11(2)













































































Search results

Summary of Contents for 4-113-168-11(2)

Reviews:

Related manuals for 4-113-168-11(2)

Brands by name

Popular brands

Sony 4-113-168-11(2), Operating Instructions Manual

Search results

Summary of Contents for 4-113-168-11(2)

Reviews:

Related manuals for 4-113-168-11(2)

Brands by name

Popular brands