Sony 4-113-168-11(2) Operating Instructions Manual Download

Page: 25 / 76

ICD-BX700 4-113-168-11(2)

Starting to Record

Automatically in

Response to Sound

– the VOR Function



PLAY/

STOP•

ENTER

–





DISPLAY/



REC/

PAUSE



You can set the VOR (Voice Operated

Recording) function to “ON,” to make the

IC recorder start recording when the IC

recorder detects sound, and pause when

no sound is heard, eliminating recording

during soundless periods.

The VOR function is set to “OFF” when

you purchase the IC recorder.

Press and hold DISPLAY/MENU to

enter the menu mode.

The menu mode window will be

displayed.

Press –





+ to select “VOR,”

then press



PLAY/STOP•ENTER.

Press –





+ to select “ON,”

then press



PLAY/STOP•ENTER.

Press



(stop) to exit the menu

mode.

Summary of Contents for 4-113-168-11(2)













































































Search results

Summary of Contents for 4-113-168-11(2)

Reviews:

Related manuals for 4-113-168-11(2)

Brands by name

Popular brands

Sony 4-113-168-11(2), Operating Instructions Manual

Search results

Summary of Contents for 4-113-168-11(2)

Reviews:

Related manuals for 4-113-168-11(2)

Brands by name

Popular brands