Working Instructions (mech)
1223-6753 Rev 1
Sony Ericsson Mobile Communications AB – Company Internal 53(59)
Reassembly
Carefully slide the Hinge Assy to its close position as shown
in the picture.
Hold the Hinge Assy in a 30
o
angle and insert the two tabs
into the slots on the top of the Lower Front Cover as shown
in the picture.
Press the Hinge Assy to snap it in position.
Turn the phone over.
Tighten these four Screws (M1.4x3.5) using the JCIS No.0
Screw Bit to a torque of 10 Ncm.
