Working Instructions (mech)
1223-6753 Rev 1
Sony Ericsson Mobile Communications AB – Company Internal 18(59)
Replacement
4.9 KRH Label
Follow the 3.1 Disassembly instruction!
Carry out the replacement as described below.
Follow the 5.7 Reassembly instruction!
REMOVAL
Read the old label and/or write the information into the
“Label make” program before removal
Note the position of the label before removal
Heat up the label by using hot air, if needed
Carefully remove the label without causing scratches
If there still are residues, clean the surface with isopropyl
alcohol
INSTALLATION
Check that the proper label format is loaded in the Zebra
printer
Write a new label by using the program “Label make” and
check that the printing is OK
Take the new label and place it onto the frame as in the
adjacent picture
One label only is allowed!
