M600i
Control panel 73
This is the Internet version of the user guide. © Print only for private use.
Settings tab
Auto
– backlight switches on when you
tap the screen, press a key or receive an
incoming call. After a short time of
inactivity the light switches off.
On
– backlight is always on, but after a
short time of inactivity it fades to the
dimmed level that you can adjust on the
Brightness tab.
Brightness tab
Select the backlight mode and adjust the
brightness with the slider or the Jog Dial.
Select
Default
to reset all light levels to the
factory values.
Device management
Device management enables the remote
distribution of settings for your phone, for
example Internet, email, SMS and MMS. It
also makes it possible to manage (list, install,
update and uninstall) themes and client
software on the phones. Device management
is useful if an enterprise has, for example,
defined a set of standard software that should
be used on all employees’ phones.
To enter the settings or manage software in the
phone, a device management session is set up
between the phone and a device management
server. The session can be initiated from the
phone by you or from the server.
Device management dialog
Select
Tools > Control panel > Device >
Device management
. The device
management server profiles, if any, are listed.
The profiles settings describe how the profile
will handle the start of a Device management
session and the notifications given during the
session. In the device management dialog you
can:
•
Initiate the phone management session by
highlighting a profile and selecting
Connect
.
•
Create a new device management server
profile manually by selecting
More > New
profile
.
•
Initiate reconfiguration for a new operator
by selecting
More > Clear ACL
. This
might be necessary if your phone is
already configured for another operator.
•
Edit or delete device management server
profiles.
Note:
A profile may be locked by the operator.
If it is, you cannot edit or delete the profile or
clear ACL.
The device management dialog consists of two
tabs, the
Details
tab and the
Settings
tab. In
the
Details
tab you edit details for the
connection, like user name for the account on
the device management server and the server