SEMC Troubleshooting Manual
TROUBLESHOOTING
Equipment List
K630 - V640 - K660
K630, V640 and K660 Equipment List
K630 and V640
Note: Additional information about the equipment used for TRS can be found in the Repair
Tools Catalogue on CSPN or on the following location: CSPN – Repair Instructions – Electrical –
K630, V640 – Equipment List.
K660
Note: Additional information about the equipment used for TRS can be found in the Repair
Tools Catalogue on CSPN or on the following location: CSPN – Repair Instructions – Electrical –
K660– Equipment List.
TRS Fixture Kit
K630 and V640
Location: CSPN-Repair Instructions-Electrical- K630, V640 -Equipment List
K660
Location: CSPN-Repair Instructions-Electrical-K660 -Equipment List
Dummy Battery
K630 and V640
Location: CSPN-Repair Instructions-Electrical- K630, V640 -Equipment List
Part number: NTZ 112 533
K660
Location: CSPN-Repair Instructions-Electrical-K660 -Equipment List
Part number: NTZ 112 533
Instruments
Power Supply Channel 1 VBATT
Agilent 6632B or similar
Location: CSPN-Repair Instructions-Level: Mechanical-Tool Catalogue
Instrument Settings:
Voltage: 3.8 Volt
Limiter: 2A
Note: During the calibration the accurate voltage from the VBATT must be within ±0.015 V. If
this is not fulfilled it will result in a faulty calibration. (For more information about
recommended power supply units, see the Repair Tool Catalogue on CSPN under the Mechanical
level. The Power Supply Channel 1 VBATT must allow reverse current.
Note: Maximal cable length between the Power Supply Channel 1 VBATT and the dummy
battery must be maximum 1m. The cable must have a capacity for at least 16A.
Note: It is very important to follow instrument settings instructions when performing the
Battery Calibration Test.
Power Supply Channel 2 DCIO/SEPI
Agilent 6632B or similar
Location: CSPN-Repair Instructions-Level: Mechanical-Tool Catalogue
Instrument Settings:
Voltage: 5.0 Volt
Limiter: 2A
Note: It is very important to follow instrument setting instructions when performing the
Current Calibration Test.
Oscilloscope
Tektronix TDS 2012 or similar
Location: CSPN-Repair Instructions-Level: Mechanical-Tool Catalogue
Digital Multimeter (DMM)
Fluke 83 or similar
1215-3608 rev. 1
3
(96)
TROU
B
L
E
S
H
O
OTIN
G