Sonoro QUBO SO-220, Operating Manual

Page: 75 / 148

© sonoro audio GmbH 2018
75
Example
Settings made:
• Alarm time: 07:00 a.m.
• Brightness: 15
• Timeframe: 30 min
At 06:30 a.m., the alarm light is switched on and the brightness is increased
gradually from level 0 to level 15 by 07:00 a.m.
8.6 Switching the alarm clock on/off
Switching on the alarm clock
1. To switch on the alarm clock, briefly press the [Alarm 1] or the [Alarm 2] button on
the front of the device or the remote control.
Switching off the alarm clock
2. To switch off the alarm clock, briefly press the [Alarm 1] or [Alarm 2] button again.
8.7 Switching off the alarm clock after the alarm sounds
1. To switch off the alarm, press one of the following buttons:
• [Alarm 1]
• [Alarm 2]
• Click wheel
• [Standby]
W
The alarm will remain activated for the next day. This does not apply if the
non-recurring alarm setting is in use. The alarm light remains on and retains
its current brightness.
.
2. Press the [Light] button to switch the alarm light off.
3. To switch the alarm clock off and have it come back on after a set period of time
(Snooze), press the [SNOOZE] button on the remote control.
W
The remaining snooze time is displayed. After the set time expires, the
alarm will sound again.
After 60 min, the alarm is switched off automatically.
Alternatively, you can turn the click wheel when the alarm sounds to set the snooze
time. Press the click wheel to confirm.
GB
sonoro_qubo_manual.indd 75 19/07/2018 15:37