Sonoro QUBO SO-220, Operating Manual

Page: 66 / 148

© sonoro audio GmbH 2018
66
Setting the date manually
Fig, 11: Setting the date
1. Press the [SETUP] button on the device or the remote control in Standby mode.
W
The display shows [Set Time]
(Fig. 11)
2. Press the [Next] button.
W
The display shows the [Set Date] menu.
3. Press the click wheel.
W
You can now set the date according to the same procedure as described
in a ‘Setting the time manually’ on page 65.
Switching the date on/off
Fig, 12: Switching the date on/off
1. Press the [SETUP] button on the device or the remote control in Standby mode.
W
The display shows [Set Time]
2. Press the [Next] button twice..
W
The display shows the [Date]menu.
(Fig. 12)
3. Press the click wheel.
W
You can now switch the date on or off.
7.3 Making the basic settings
When the device is switched on, you can make the following configurations in the
[Settings] menu:
• Set the time format.
• Set the date format.
Use the [Next ] or [Previous] button to switch between the hours and minutes
display.
After 10 seconds of inactivity, the device automatically goes into Standby mode
without saving the settings.
sonoro_qubo_manual.indd 66 19/07/2018 15:37