Sonoro QUBO SO-220, Operating Manual

Page: 70 / 148

© sonoro audio GmbH 2018
70
1. Go to the corresponding submenu or press the corresponding button on the
remote control.
2. To adjust the bass, select [Bass]
(Fig. 21/A)
and turn the click wheel. To adjust the
treble, select [Treble]
(Fig. 21/B)
and turn the click wheel.
3. Press the click wheel to adopt the settings or wait 10 seconds.
7.5 Setting the Sleep Timer
The Sleep Timer is an automatic power-off function that switches the device to
Standby mode after the specified time has expired.
Setting the Sleep Timer
Fig, 22: Switching on/off the Sleep Timer
1. Press [SLEEP] button on the top of the device or the remote control.
W
The display shows the [SLEEP] symbol
(Fig. 23/1).
Switching off the Sleep Timer
2. To switch off the sleep timer, press the [SLEEP] button again
W
The symbol on the display is hidden.
Setting the time interval for the Sleep Timer
Fig, 23: Setting the time interval for the Sleep Timer
1. Hold down the[SLEEP] button on the top of the device or the remote control.
W
The Sleep Timer appears
(Fig. 23)
and the Sleep symbol flashes.
(Fig. 23/1)
2. Turn the click wheel to select the desired time interval length.
(Fig. 23/2)
. The
maximum time interval is 120 minutes.
Alternatively, you can also use the [Next] or [Previous] buttons to adjust the values.
If the device was switched off by the Sleep Timer, it will start in the last heard mode
when you turn it on again.
sonoro_qubo_manual.indd 70 19/07/2018 15:37