Sonoro QUBO SO-220, Operating Manual

Page: 68 / 148

© sonoro audio GmbH 2018
68
You can set three different date formats
(Fig. 14/A, B and C)
as well as the current day.
The configuration options are:
• A:
Current day, month, year.
• B:
Current month, day, year.
• C:
Current month (in words), day, year.
Setting display dimmer
Fig, 15: Setting display dimmer
Depending on the ambient brightness, the display is switched to bright or dark. The
ambient brightness is detected by a sensor beside the display.
You can set the desired brightness level.
• Display High: Level 08 to 15
(Fig. 16/A)
• Display Low: Level 01 to 08
(Fig. 16/B)
Setting alarm light
Fig, 16: Setting alarm light
In addition to the alarm, you can also be woken up in the mornings with a light that
gets gradually brighter (only in conjunction with sonoroLIGHT).
To this end, you can proceed as follows to set the desired brightness of the alarm
light and the time- frame in which the alarm light should reach this brightness:
• Brightness: 01 to 32
(Fig. 16/A)
• Alarm light: 0 to 60 min
(Fig. 16/B)
Setting the automatic time/date update function
Fig, 17: Setting the automatic update function
sonoro_qubo_manual.indd 68 19/07/2018 15:37