Sonoro QUBO SO-220, Operating Manual

Page: 71 / 148

© sonoro audio GmbH 2018
71
Alternatively, you can also use the [Next] or [Previous] buttons to adjust the values.
3. Press the click wheel to confirm the entry. When the specified time expires,
playback gradually fades out.
Dimming light (sunset)
In addition to a Sleep Timer, you can also dim or switch off a connected lamp (only in
conjunction with sonoroLIGHT).
1. Ensure that sonoroLIGHT is connected and that its dimmer function is switched on.
2. Switch on the light, please see chapter 7.6 ‘Switching the light on and off’ on page
71.
3. Program a Sleep Timer.
W
After the Sleep Timer has elapsed, the light is reduced gradually and is
switched off after 40 seconds.
7.6 Switching the light on and off
You can switch a connected lamp on and off (only in conjunction with sonoroLIGHT).
1. Ensure that sonoroLIGHT is connected and that its dimmer function is switched on.
Fig, 24: Switching on the light
2. Press the [Light] button on the device or the remote control.
W
The light is switched on (brightness level 8) and the display shows the
text [sonoroLIGHT On]
(Fig. 24).
Fig, 25: Setting the brightness
3. Turn the click wheel within 4 seconds to set the brightness of the light (level 00 to
32).
(Fig. 26).
If you press the [Standby] button during the Sleep Timer, the light remains switched
on. If you press the [Light] button while the light is being dimmed, the light is
switched off immediately.
GB
sonoro_qubo_manual.indd 71 19/07/2018 15:37