Sonifex SignalLED Series, Handbook

Page: 22 / 28

5 Appendices
12
above the serial number label, which indicates the bottom of the
assembly. Also make sure that the hanger plate fits into the slots in
the wall mount moulding.
7) This combination is then fixed to the right hand flush mount assembly
end moulding with the 4 supplied No.4 x ¾ self tap screws. See Fig
5-5. Do not substitute any other screws in these positions and do not
reuse the screws removed from these positions, because they will not
support the sign correctly.
8) Please refer to the installation notes for the LD-40E style signs to
complete the final fitting and colour/configuration set-up.
Fig 5-3: Removing the Left
Hand Assembly Fig 5-2: Kit Components Used for the Conversion
Fig 5-4: Removing the Right Hand Flush Wall
Moulding Fig 5-5: Right Hand Conversion Re-Assembly