Sonifex NICA X, Reference Manual

Page: 53 / 64

NICA X Reference Manual
45
<loopback> = 0 - off, 1 - on.
EXAMPLE:
(PC) 0:LBK 1 ↵
(NX) 00,1 ↵
i.e. Set system loopback on; the NICA X accepts the command.
Enable/Disable System Options (OPT)
DESCRIPTION: Configure the settings for system options.
SYNTAX: <unit id>:OPT <audio>, <x21clk>, <monomix>
RESPONSE: <respcode>,<audio>,<x21clk>,<monomix>
PARAMETERS:
<audio> = 0 - microphone, 1 - line.
<x21clk> = 0 - internal clock, 1 - external clock.
<monomix> = 0 - left channel for mono, 1 - left and right sum for mono
EXAMPLE:
(PC) 0:OPT ↵
(NX) 00,0,1,1 ↵
i.e The NICA X accepts the command and reports back the current settings.
Incoming Calling Line Identification (CLI)
DESCRIPTION: Return the CLI for the specified channel.
SYNTAX: <unit id>:CLI <channel>
RESPONSE: <respcode ( =0 )>,<isdn number>
PARAMETERS:
<unit id> = 0 - local unit, 1- far end unit.
<channel> = The channel number ( 1 or 2 ).
<isdn number> = ISDN destination number, up to 24 digits.
EXAMPLE:
(PC) 0:CLI2 ↵
(NX) 00,01672517120 ↵
i.e. Request the CLI of channel 2; the NICA X accepts the command and reports back the CLI.
Information (INF)
DESCRIPTION: Request the product name, revision number and serial number for the system
SYNTAX: <unit id>:INF
RESPONSE: <respcode ( =0 )>, <product name>
PARAMETERS:
<product name> = the name of the product and revision number of the software.
EXAMPLE:
(PC) 0:INF ↵
(NX) 00,NICA X 1.2 ↵
i.e. Request product information; the NICA X accepts the command and reports back the product information.
Interface Revision (IFR)
DESCRIPTION: The interface revision of the NICA X remote control protocol for this version.
SYNTAX: <unit id>:IFR <revision>
RESPONSE: <respcode ( =0 )>,<interface revision>,<revision>
PARAMETERS:
<unit id> = 0 - local unit, 1- far end unit.
<revision> = The revision of the protocol that the controlling software knows about.
<interface revision> = The interface revision of the NICA X remote control protocol for this version.
EXAMPLE:
(PC) 0:IFR1 ↵
(NX) 00,2,1 ↵
i.e.Set the revision level at 1; the NICA X accepts the command and reports back that the settings.
Manual Dial (DIL)
DESCRIPTION: Manual dial the given ISDN number on the selected TA channel.
SYNTAX: <unit id>:DIL <channel>, <isdn number>
RESPONSE: <respcode ( =0 )>
PARAMETERS:
<channel> = TA channel number ( 1 or 2 ).
<isdn number> = ISDN destination number, up to 24 digits.
EXAMPLE:
(PC) 0:DIL1, 01933651819 ↵
(NX) 00 ↵
i.e dial ISDN number 01933651819 on channel 1; the NICA X accepts the command.