Sonifex NICA X, Reference Manual

Page: 30 / 64

NICA X Reference Manual
22
To make a call from the BOOK select BOOK from the Top Menu and then select the required BOOK entry by either
using the PREVious and NEXT keys or by simply typing in the number.
1: Idle
2: Idle
3>WRFM
PREV NEXT DIAL CONF
Once the required entry is displayed press the DIAL key and the codec Mode will be set (if programmed) and the
ISDN numbers will be dialled. Once connected, the name of the Book entry will then be displayed.
When a BOOK entry is cleared, the codec Mode is set back to the default Mode.
The BOOK menu can also be accessed from DIAL-ONE-BOOK or DIAL-TWO-BOOK and then only the chosen
channel will be dialled.
5.4.2 - Making A Call With A Sub-Address
Quick Reference Table
MEANS OF
CONTROL MENU
REMOTE
CONTROL
DIP
SWITCHES
ACTION - DIAL DIL
To make a call with a sub-address extension simply enter # and up to a three digit sub-address after the number
e.g. 09713889044#344 dials with a sub-address 344.
The equipment with sub-address 344 connected to 09713889044 will answer the call.
The Sub-address is used to filter calls to the correct port or terminal equipment on an ISDN line. The remote
terminal equipment must have a sub-address defined. An incoming call with a sub-address element present will be
checked against the sub-address defined. If they match, the call will be answered. If they do not match, the call
will not be answered. If the remote equipment does not have a sub-address set, or if the sub-address element is
not presented by the ISDN network, the call will be accepted.
5.5 - Clearing A Call – Stop
Quick Reference Table
MEANS OF
CONTROL MENU
REMOTE
CONTROL
DIP
SWITCHES
ACTION - STOP STP
To clear a single call select STOP and then either channel ONE, TWO or BOTH. The display will show ' Call clearing',
the call will be cleared down and the Call LED will turn off.
By selecting STOP and BOTH, both channel one and two will be cleared one after the other.
5.6 - Answering A Call
The unit will always auto answer a call if a channel is free as long as the Call Permit configuration condition is met
(see section 4.5). When a call is answered and connected, the relevant Call LED will be illuminated and the display
will show ‘IN’ and the Calling Party Number (CPN), if provided. If the CPN matches a number stored in a BOOK
entry then the name of the book entry will be displayed.