57
Embedded Web Server
6
Adding an Encoder
An encoder can be assigned to an input, mix-point, or output. To add an
encoder, click on the point you would like to add it to. The configuration
window for the point clicked will be displayed.
In the configuration window select the
Encoder 1
or
Encoder 2
tab. The
Encoder 2 tab is shown on stereo points and allows each encoder to control
one of the functions: metering, level, or pan.
In the encoder tab select the
Display
,
Page
, and
Encoder Position
to assign
the encoder to. Then select the
Function
and
Colour
of the encoder. Only
select
Lock
if you want to prevent the use of the encoder. These settings are
covered in more depth in the
Encoder Tabs
section of this manual. Click
Apply
to add the encoder.
Fig 6-32: Adding an encoder
The added encoder can now be seen in the audio routing grid and the
encoder assignments overview. It is now also available for use via the top
panel of the device.
Fig 6-33: Added encoder shown in audio routing grid
Fig 6-34: Added encoder on the top panel of the device
