55
Embedded Web Server
6
Adding an Output Group
By default, the commentator has the virtual outputs added to the routing
grid, these can’t be removed. The two commentator headphones on the
AVN-CU2-DANTE and the four commentator headphones on the AVN-CU4-
DANTE are also added by default.
Additional digital, analogue, and Dante outputs can be added to the unit as
the user desires.
To add a new output group to the audio routing grid:
• Click the
+
button next to
INPUTS
, this will open a new window.
• Type in a name for the new output group, this name is displayed as the
label for the group on the outputs section of the grid.
• Select the output type, digital and analogue outputs are located on the
rear of the device whereas Dante outputs are accessible using Dante
Controller.
• Select the available channels you would like to add to the group. A
maximum of 8 channels can be added to a group.
• Click the
Add
button, the output will now appear in the outputs section
of the grid with the name provided.
Tips:
• A tooltip will be displayed if there are any issues with adding the output.
• The shift button
and control button
can be used to select
multiple channels.
• The
Clear All
button can be pressed to deselect all channels.
• Clicking
Cancel
at any time will discard all changes.
Ctrl
⇧
Shift
Fig 6-30: Adding an output group
