39
Embedded Web Server
6
Fig 6-5: Control Port Settings
Fig 6-6: Primary Dante Network Port Settings
Fig 6-7: Secondary Dante Network Port Settings
Address Mode
The address mode determines how the port obtains its IP address. When
set to dynamic, the unit will attempt to acquire an IP address automatically
from either a DHCP server or via auto configuration if no DHCP server is
found. The actual IP address will be shown on the device information page.
When static mode is used, the IP address and subnet mask values entered
will be assigned to the port.
Static IP Address
This is the IP address that will be assigned to the port when static address
mode is selected. It is important to ensure that this IP address is not
currently in use on the network. This value is not used when the address
mode is dynamic.
Static Subnet Mask
This is the subnet mask that will be used for the port when static address
mode is selected. This value is not used when the address mode is dynamic.
Static Gateway
This is the router IP address that will be used for the port when static
address mode is selected.
Note
If the device is in switched mode the secondary Dante network port
settings will not be displayed.
If any of the network configuration options are changed, the unit will
automatically restart to implement the new settings. If the address mode of
the control port is changed, a new connection will need to be made once
the unit has restarted and the IP address assigned via DHCP is known.
Otherwise, the new page will be reloaded automatically once the restart of
the unit is complete.
