Adjusting the sound
10
Changing the effect type
① While pressing
, press to select the effect.
The button lights when the effect is not off.
ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー
• The effect type name is shown on the display.
• 5 types of effects can be chosen.
1.
OFF
2.
CHORUS (CHRS on display)
3.
FLANGER (FLNG on display)
4.
DELAY (DLY on display)
5.
CRUSH (CRSH on display)
Changing effect parameters
① While pressing
, turn the
RATE/speed
and
PITCH/amount
knobs.
ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー
• The parameter is shown on the display.
• The speed parameter changes the effect time, and
the amount parameter changes the strength of the
effect.
• The adjustment range is 0–127.
Changing the reverb type
① While pressing
, press
to select the reverb.
The
button lights when the reverb is not off.
ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー
• The reverb type name is shown on the display.
• 8 reverb types can be chosen.
1.
OFF
2.
HALL
3.
ROOM
4.
ARENA (ARNA on display)
5.
PLAT (PLAT on display)
6.
TUNNEL (TNNL on display)
7.
INFINITY (INF on display)
8.
TAPE
Changing reverb parameters
① While pressing
, turn the
FLTR CO/reverb
knob.
ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー
• The parameter is shown on the display.
• The adjustment range is 0–127.
• This adjusts the reverb mix amount and direct
sound.
• In TAPE, this adjusts the noise mix and wow flutter
amount.
Changing the sweep speed
① While pressing
, turn the
CUTOFF/speed
knob.
ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー
• The parameter is shown on the display.
• The adjustment range is 1–7.
• The time sweep takes to change one step is as
follows.
1.
7.8 ms
2.
15.6 ms
3.
23.4 ms
4.
31.3 ms
5.
39.1 ms
6.
46.9 ms
7.
54.7 ms
Changing the sweep shift amount
① While pressing
, turn the
RESO/shift
knob.
ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー
• The parameter is shown on the display.
• The adjustment range is 0–7.
