Page 8
Launching the Installation Wizard
To begin the configuration of your SonicWALL, you have to log into the SonicWALL using a Web browser
and the default LAN IP address, 192.168.168.168, of the SonicWALL. Follow the instructions below:
1. Launch your Web browser.
Because you are temporarily disconnected from the Internet, you may receive an error message when
your Web browser first opens. This does not affect your installation process. Continue with the steps
below.
2. Enter 192.168.168.168 in the Location or Address field.
Your Web browser must support JAVA and HTTP uploads in order to fully manage the SonicWALL
appliance. Internet Explorer 5.0 or higher, as well as Netscape Navigator 4.0 or higher, are
recommended.
3. The SonicWALL Installation Wizard launches and guides you through the configuration and setup of
your SonicWALL.
If you cannot connect to the SonicWALL, check the following:
• Did you correctly enter the SonicWALL LAN IP address in your browser window?
• Is the SonicWALL connected to the same network as your computer?
• Have you changed the TCP/IP network settings on your computer? (Step 4)
5
Alert!
Setup Continues
qsg_6400.fm Page 8 Wednesday, November 20, 2002 2:55 PM
