SonicWALL Quick Start Guide Page 11
DHCP Server Disabled
If you did not enable the SonicWALL DHCP server, a window with configuration instructions is
displayed.
After the SonicWALL has restarted, change the nework settings on computers located on the LAN. Configure
each computer with a static IP address from the range displayed in your configuration instructions.
If the computer is running Windows 2000, follow the steps below:
1. Click Start, then Settings.
2. Select Network and Dial-up Connections.
3. Right click on the network icon.
4. Click Properties.
5. Click Internet Protocol (TCP/IP), and then click Properties.
6. Select Use the following IP address.
7. Enter an IP address from the range indicated in your Restart screen.
8. Enter the Subnet Mask in the Subnet Mask field.
9. Enter the SonicWALL LAN IP address in the Default Gateway field.
10. Enter the DNS server IP address(es) provided by your ISP in the DNS
fields.
11. Click OK, then OK again to close the Properties window.
If you are not using Windows 2000 as your operating system, consult the SonicWALL Internet Security Appliance
Administrator’s Guide, Appendix E, Configuring TCP/IP Settings, for more operating systems. The Administrator’s
Guide is located on your product CD and requires Acrobat Reader to view it. Acrobat Reader is also provided on
your product CD.
Installation Complete
!
The SonicWALL is now functioning and protecting your network from Internet-based attacks and break-ins.
B
Print this screen. You need this information to
configure computers on your network.
Alert!
qsg_6400.fm Page 11 Wednesday, November 20, 2002 2:55 PM
