3-5
28. Current Mark
①
Shows the tidal current signal received from a current meter. The
direction shows the tidal current direction, and the length shows
the tidal current speed.
Current Mark
②
:
Shows the tidal current direction received from a current meter.
When there is no tidal current signal, the marker moves to the
ship position.
An example of a tidal current mark display
29. Event Mark
: Shows event mark
on the cross cursor position each time the event
key is pressed.
30. Event Mark
: Shows event mark
on the cross cursor position each time the event
key is pressed.
31. Event Mark
: Shows event mark
on the cross cursor position each time the event
key is pressed.
32. M-Dist Mark:
Shows the distance mark that divides the range into 3 to 5 equal
distances.The multiple marks can be selected from “Solid line”, “Dotted
line” or “Non-display” by menu setting.
33. Color Bar:
Shows the intensity of the received echo that is displayed in 32 color
gradations. The signal intensity increases as the color changes to red.
34. Target water depth: Shown the target water depth position from the transducer. This
information is displayed when TVT is ON.
Example)
△
02
2m upward from the transducer.
▽
10
2m downward from the transducer.
35. TX Offset:
Changes the display according to the set value of the TX offset. This
information is displayed when TVT is ON.
▽
: High,
▲
: Middle,
△
:
Low (Note)
Note: An external device cannot be connected to some models. Contact our service staff for inquiries.
Summary of Contents for KCS-5885Z
