LXR OWNERS MANUAL
19
1
2
3
5
11
9
12
10
8
6
7
4
PATTERN EDITING
The 16 SEQUENCER buttons are used to set and remove steps in the selected pattern. Each button
is a 16th note from a 4/4 bar. If a step is set, the LED in the button is lit.
SOUND EDITING
> The 7 VOICE buttons (10) select the active voice, which is indicated by a lit LED.
> The parameters of the voice are divided into several pages which can be selected using the 8
SELECT buttons (12).
> Each voice type has its own set of parameters, but the overall page structure is the same for all
voices.
> Parameters in the display can be edited using the 4 encoders below.
Parameter editing
As an example lets
take a look at the
filter page:
To change the frequency of the filter of voice 3
> Press ' VOICE Button 3' to select the voice.
> Press ' SELECT button 6' to show the filter page.
> Use the first knob to adjust the 'frq' parameter.
CLEAR KIT / INIT SOUND
If you want to start over with a fresh sound, you can use the
‘clear kit’ option.
> Press and hold SHIFT + COPY = CLEAR and use the encoder to
select “Clear [kit]?”
> Confirm the selection by pushing the CLEAR button again.
The kit will now revert back to the init sound.
7.2. STEP (EDIT) MODE
This Mode is used to edit the step parameters volume, note
value and probability as well as automation data. You can enter
the step edit mode by hitting the VOICE button again, when you
are in voice mode. It is indicated by a blinking voice LED.
The VOICE button will toggle between voice and step mode.
Did you know?
If you have a MIDI keyboard connected, you can enter
NOTE values for a step via MIDI in Step Edit Mode.
Frq
32
res
120
typ
LP
drv
0
Summary of Contents for Erica Synths LXR-02
Page 1: ...O W N E R S M A N U A L Julian Schmidt...
Page 2: ......
Page 6: ...1 2 3 5 11 9 12 10 8 6 7 4...
