SONIC-POTIONS Erica Synths LXR-02, Owner'S Manual

Page: 27 / 44

COMPRESSOR
A compressor is a dynamic processor that is able to reduce the volume of loud
sounds and boost the volume of quiet sounds, thus reducing the dynamic range of
the signal.
Displayed name Name Description
Compressor. typ FX Type
Selects the Audio output the FX signal
is mixed to.
out Output routing
Mixing ratio between the original and
the FX signal.
d/w Dry / Wet ratio
1:1 up to 8:1 in dB. Strength of the
compression. For example a ratio of 2:1
will attenuate the volume of a signal
2dB above the treshold down to 1dB
above the treshold.
rat Compression ratio
Time it takes for the compressor to kick
in. 0.3 to 100ms range.
atk Attack
Time it takes to return to normal gain,
after the input falls below the treshold.
25 to 200ms range.
dec Decay
The treshold sets the level at which the
compression effect sets in. -96 to 0dB.
tre Treshold
Compression lowers the volume. Use
the output gain to make up for the
difference.
gai Makeup Gain
Parameters
DELAY
Straight forward delay FX. Not much to say here. It’s a classic!
Try using the range control for very short delay times and LFO modulation to get
some flanger action going!
7.10. RELOAD BUTTON
Reload is a handy little function, that allows you to revert the current kit and
pattern back to its original state. If you tweaked the kit during a live performance
and want to revert all changes immediately, push SHIFT + RELOAD.
Displayed name Name Description
Delay. typ FX Type
Selects the Audio output the FX signal is
mixed to.
out Output routing
Mixing ratio between the original and the
FX signal.
d/w Dry / Wet ratio
Currently only 1 delay available. typ Delay type
Adjust the delay time in the range
specified by the range parameter.
tim Delay time
Sets the range for the delay time dial.
The low range is 1ms to 20ms
The high range is 20ms to 0.7sec.
rng Time range
Frequency of the lowpass filter in the
feedback path.
ton Tone
Controls the number of repeats. fbk Feedback
Parameters
LXR OWNERS MANUAL 27