Time
Amplitude
Attack
Decay
Time
Amplitude
Attack
Decay
SLOPE
The slope parameter controls the shape of the generated curve. A setting of 63 will
give you a linear envelope as seen above. Lower settings will result in an
exponential curve, higher values result in a logarithmic curve.
REPEAT
A special feature of the envelope to simulate claps and other sounds with a
fuzzy/rattling attack.
If the repeat count is set to a value greater than zero, the envelope is in repeat
mode.
The slow onset of the attack stage is replaced by the repeat stage in which the
envelope is retriggered rapidly. The attack parameter controls the duration of the
complete repeat phase.
8.4. TRANSIENT GENERATOR
The transient generator is used to shape the beginning of a sound. Since the
perception of sounds is heavily influenced by their first few milliseconds, this
feature is useful to spice up or vary the sound character of an instrument.
There are different modes the transient generator uses to shape the attack.
Curve with a low slope setting. Exponential decay stage.
Curve with a high slope setting. Logarithmic decay stage.
LXR OWNERS MANUAL
31
Repeat Phase
Repeat Count = 3, Decay controled by attack settings
Decay Phase
Summary of Contents for Erica Synths LXR-02
Page 1: ...O W N E R S M A N U A L Julian Schmidt...
Page 2: ......
Page 6: ...1 2 3 5 11 9 12 10 8 6 7 4...
