Displayed name Name
Description
Drive
typ
FX Type
Selects the Audio output the FX signal is mixed to.
out
Output routing
Mixing ratio between the original and the FX signal.
d/w
Dry / Wet ratio
Input gain of the distortion unit.
drv
Drive strength
Tone Control Filter.
ton
Tone
Tube
Bias
Fold
Offset
Clip
Feedback
col
Colour
Output volume of the distortion.
vol
Volume
7.9. FX MODE
The LXR provides a digital FX processor. Only 1 effect can be used at a time.
Currently there are 4 FX available: Drive, Ringmodulator, Compressor and Delay. You
can use the FX processor by setting the output routing on the mixer page to “FX”.
So the voice will be routed to the FX bus before going to the output. You can select
which of the voices will be processed by the FX processor. Selected FX and its
settings are saved within the KIT so think of the FX as more of a sound design
insert block rather than master send FX.
MENU LOCATION
The FX menu is accessed by pushing SHIFT + FX.
DRIVE
The drive FX is a collection of different distortion algorithms. It offers 3 different
types of saturation. In contrast to the drive parameter of the single voice filter and
mixer pages, this FX processes all signals in a single distortion unit. This leads to
interesting intermodulation between the input signals.
Drive Types
The 4th parameter “type” selects the drive algorithm to use.
> Tub – Adds tube Saturation.
> Fld – A wavefolder distortion.
> Clp – A rodent inspired hardclip pedal emulation.
The feedback parameter of the Clip processor will generate a
tone when no input is present. This is normal behaviour, as the
effect is quite similar to the feedback sound a microphone
produces in front of a speaker. While a drum pattern is playing,
it gives nice intermodulation, but without input, a clean tone is
produced. Just pull down the master volume if you stop the
sequencer when you are using full feedback.
RINGMODULATOR
The ringmodulator multiplies the input signal with a second oscillator signal. Ever
wanted to hear a Dalek beatboxing? Then the ringmod is your friend!
Parameters
Displayed name
Name
Description
Ring.
typ
FX Type
Selects the Audio output the FX signal
is mixed to.
out
Output routing
Mixing ratio between the original and
the FX signal.
d/w
Dry / Wet ratio
Modulation Waveform.
wav
Waveform
Frequency of the modulation waveform.
frq
Frequency
Parameters
LXR OWNERS MANUAL
26
Summary of Contents for Erica Synths LXR-02
Page 1: ...O W N E R S M A N U A L Julian Schmidt...
Page 2: ......
Page 6: ...1 2 3 5 11 9 12 10 8 6 7 4...
