Guarantee conditions
First of all thank you for the purchase and trust
placed in the team. We hope that the thermostat
Siesta meets the needs of your installation.
- Before installing the thermostat make sure that
environmental conditions are suitable,
temperature, humidity, pollution and
greenhouse gas emissions, and that any of these
factors may affect the efficient operation
- The device is an independent control device for
surface mounting on a universal embedded box,
and type 2 dry environment pollution.
- For any work, either as installation or repair, the
regulator must be disconnected from the power
supply.
- Electrical connections may only be indicated in
this manual and on the sticker on the back of the
cap connections.
- This controller is not a safety device or can be used
as such, is responsible incorporate appropriate
protection for each type of facility (homologated)
by the installer.
- Installation, electrical connection, commissioning
and maintenance must be performed only by
qualified personnel.
- If visualize possible defects that could cause
damage or malfunction in the system, do not
connect the appliance.
- Forbidden the total or partial reproduction of this
document by any means without prior written
authorization of Sonder Regulación S.A.
- The graphics and information in this manual are
indicative only and may include technical
inaccuracies or typographical errors.
- Sonder Regulación S.A. reserves the right to make
changes to the product, technical data, or
instructions for assembly and use without notice.
This device has 3 year warranty, it is limited to
replacement of the defective part and will be
delivered in the same material reception
conditions, packaging, batteries, instructions or
any other accessory that includes this product will
not be replaced and not be noted in the packing
slip.
We decline any responsibility for damage caused
to the appliance by bad handling, failure to follow
instructions contained in this manual or technical
ignorance of the needs of the installation.
For repairs under warranty must present the
documentation that accredits purchase of the
device within the validity period of this warranty
and as accurate a description as possible of the
defect or anomalous behavior of the product
according to the user.
If the repair is out of warranty, it will inform the
user of the viability and cost of it. The valuation of
our technical department may be an additional
cost to the user.
Are out of guarantee:
!
Devices with serial number deteriorated,
deleted or modified.
!
Devices whose connection or use have not been
implemented in accordance with the attached
to the appliance.
!
Devices modified without prior agreement with
the manufacturer.
!
Devices damaged by blows or liquid or gaseous
emanations.
!
Devices with natural wear or improper use of
equipment.
!
The costs resulting from the sending or receipt
of material.
!
The demands for damages on account of loss of
profits, compensation for use, & consequential
damages. Provided that these damages are not
mandatory liability under the law.
Sonder Online Shop
www.sonder.es
Technical Information
www.sonder-regulacion.com
Energy Control
22
Cód.: 7765VØDIC16
Note: Translation is informative, the only legally binding document is the written version of it in Spanish.
UNE-EN 60730-1 + A1:2005 + A12:2004 + A13:2005
UNE-EN 60730-2-1: 1998 + A11:2005
MADE IN
SPAIN
Designed and manufactured by Sonder in Rubi as:
