Sonder Siesta -TA Series, Instruction Manual

Page: 2 / 25

Parameters
Enter in the
parameter
setting menu
Adjustables parameters
Next
parameter
Change
the value
1 s
º º º
Sonder
10 s
Factory set value
Double setpoint: comfort / eco
Temperature change for comfort setpoint
1 s
º º º º º
4 s
Temperature change for eco setpoint
1 s
º
Sonder -TA RF
º
Sonder -TA RF
º
1 s
4 s
º
Sonder
-TA RF
º º
Regulation Activated / Deactivated (keeps Frost protection)
Off
1 s
º
Sonder
-TA RF
On
4 s
º º
4 s
Regulation mode: Heating / Cooling Siesta-TA ECO (Not available for model)
Heating
1 s
Sonder -TA RF Sonder -TA RF
°
Sonder -TA RF
Cooling
4 s
Sonder -TA RF Sonder -TA RF
°
0,1 to 2°C / 0,2 to 3,6°F
0,2 to 2°C / 0,4 to 3,6°F
OFF or 5 to 18°C
41 to 64°F
20 to 35°C
68 to 95°F
-3 to +3°C
-5,4 to +5,4°F
°C or °F
5 to 19°C
41 to 66°F
Differential
Frost protection
Limit max. temperature setpoint
Sensor calibration
Temperature units
Limit min. temperature setpoint
Sonder
-TA RF
Sonder
Sonder
-TA RF
Sonder
-TA RF
°
°
Sonder
-TA RF
Sonder
-TA RF
°
° °
-TA RF
Sonder -TA RF
Display Information
º
º
Digits
The display shows by digits the reading ambient temperature.
º
Flashing digits
The display shows by flashing digits the setpoint for comfort temperature.
º
Digits & Moon
The display shows by flashing digits and moon the setpoint for eco temperature.
º
Manual off
The device no control the temperature, only remains the Frost protection function.
Display shown when the boiler or regulation pump is activated in heating mode.
Regulation in heating
Indicates the batteries status is low and should be changed.
Batteries
Temperature in °C / °F
On the screen you can see next to the temperature in what magnitude is measured:
degrees Celsius (°C) or degrees Fahrenheit (°F).
º
º
Regulation in heating
Relay switched on when the temperature is below the setpoint minus differential & relay
switched off when arrives to setpoint.
Pressing the internal key displays the current mode control and double-clicking
change the mode.
Regulation in cooling
Relay switched on when the temperature is above the setpoint plus differential & relay
switched off when arrives to setpoint.
Pressing the internal key displays the current mode control and double-clicking
change the mode.
Display shown when the boiler or regulation pump is activated in cooling mode.
Regulation in heating
Reset
Pressing by 10 seconds the internal key deletes the custom settings of the
parameters and return to the factory settings.
Information not available for Siesta-TA ECO model
Sonder -TA RF Sonder -TA RF -TA RF
Sonder -TA RF
Sonder
-TA RF
Sonder
-TA RF
Sonder
-TA RF
Sonder
-TA RF
Sonder
-TA RF
Sonder
-TA RF
Sonder
-TA RF Sonder -TA RF
Sonder
-TA RF
Sonder
-TA RF Sonder -TA RF Sonder -TA RF