Initial Issue
Issue Date 25/06/2010
User Manual: 8142/8182 Transceivers
07 Removal
Page
3of 5
1.4
THE METHOD, FOR REMOVING THE TRANSCEIVER FROM THROUGH DECK POLE OR OVER-
SIDE MOUNT:
1.
Install applicable lifting equipment to the pole.
2.
Get the crane operator to slowly lift the lifting equipment until the weight of the pole shows on
the display of the control facia.
3.
Lift the pole out of the deck tube (Ref
: Photo 1
).
Transceiver on Pole
Photo1
4.
Position the transceiver over an applicable surface for removal from the pole (Ref:
Photo 2
).
5.
Place a thick layer of foam matting or rags on the surface that the transceiver is to be placed
(Ref:
Photo 2
).
WARNING:
Never let the weight of the pole be supported on the transceiver front face.
6.
Get the crane operator to lower the pole till it is just above the foam matting or rags (Ref:
Photo
2
).
Summary of Contents for 8142-000-01
Page 100: ......
