SONARCOM ALL IN APP
Pagina 3
Battery status of your boat and Bluetooth receiver:
The boat voltage and the Bluetooth receiver voltage will be transmitted to the app. In
case the voltage of the boat becomes lower then te specified treshold, a voice alarm
will be given and repeated every 30 seconds.
No voice alarm will be given for the Bluetooth voltage. The BT (Bluetooth) receiver is
equipped with a rechargable 2600mA Li-ion battery pack. This gives a battery life of
approximately 65 hours. The battery pack is protected against: over charging, over
discharging, over current protection and short circuit protection.
The BT receiver battery pack can only be charged with the included charger (8,4V
charging current), use it properly.
When placed in the socket at home you will see a green led on the charger. Plug in
your receiver and the charger led will change from green to red. When the battery is
fully charged the led will turn back to green.
Note! Be sure your device is connected properly! When you don
’t see the led turns
red on the charger your connection is bad and the battery will not be charged.
Spot Icons:
Spot Nearby spots Stored spots Save spot
Spot icon
is displayed on your GPS vector screen. It represents your previously
saved and loaded waypoint.
Nearby spots icon
draws up a shortlist of all your saved wayoints within a range of
900 meters. It will take the boat position as a reference.
To load a spot, scroll trough the list and select the spot by clicking on it. You will get
a confirmation message that the spot has been loaded, and the spots name will
appear on top of the app next to the APP-version number.
Stored spots icon
will give al list of all stored spots on your device. Scrolling through
this list is easy by moving the list up/down. Each spot can be modified, or deleted.
To change the spot name: long press
on the spotsname, you will get an input menu
to insert the new name.
To delete a spot: you click on “erase” instead of inputting a new name.
To change latitude/lon positions: long press on lat or longitude field, and input the
new position.
!!!!! you can not load a spot from this list, therefore use the nearby icon!!!!!
Note: latitude and longitude must have a minus sign (-) when the latitude is west of London and longitude south of the meridian line.
Example: W41.0011 should be inserted as -41.001. East 004.002 should be without any sign. South 61 degree should be inserted as -61 degrees,
North 51 degrees should be inserted without any sign.