38
and reference electrode. Those must be
connected to achieve impedances < 50 k
Ω.
Duplicate Sensor. Please remove
duplicate!
A sensor is used twice or a sensor of the same
group (e.g. 1-channel ECG and 3-channel
ECG) is connected. The user must remove the
duplicate sensor before continuing.
A sensor was taken off
During the recording a sensor was removed.
There is a long beeping sound and this optical
warning. Please plug in the sensor again.
Furthermore, the sensor icon of the removed
sensor is blinking.
The docking station
Make sure that the docking station is connected to the power supply system via the power plug
and to the PC via USB cable.
The upper LED displays that the docking station is connected to the power.
The lower LED displays yellow if the inserted battery is charging and green if it is fully charged.
Data transfer via docking station
When the main device is plugged into the docking station and a measurement is on the device,
the virtual docking station displays the following:
Virtual docking station, main device is connected, measurement ready for transfer
Click
“Transfer” if you want to transfer the measurement to the PC. If you want to delete the
measurement, click at the trash icon.
Please find further information regarding data transfer in the DOMINO software instruction
manual.
Recharging the battery
There are two methods of charging the SOMNO HD
TM
battery:
1. Keep the battery in the SOMNO HD
TM
and place the device into the docking station.
The LED on the device shines orange during charging and green as soon as the battery
is fully charged.