SOMNOmedics SOMNO HD NGD050 Instruction Manual Download Page 22 | Manualshive

Page: 22 / 52

SOMNOmedics SOMNO HD NGD050 Instruction Manual Download Page 22

22

Further information for integrating the sensor in a montage/recording and the analysis please
read the DOMINO software manual.

CPAP sensor and CPAP device

Measurements with the Differential Pressure Sensor

There are two ways to connect the CPAP sensor to the CPAP device:

A) If the CPAP mask does not have a port for a pressure tube:

Place an oxygen adapter (sold separately) between the angled piece of the mask and the
oxygen hose. Connect the supplied thin silicone pressure tube to the port of the oxygen
adapter. Connect the other end of the pressure tube to the port of the pressure sensor on
the main device.

Option A: Connecting the pressure sensor to the mask via an oxygen adaptor

B) If the CPAP mask has a port for a pressure tube:

Connect the supplied silicone pressure tube to the port on the CPAP mask. Now, connect
the other end of the tube to the port of the pressure sensor on the main device.

Option B: Connecting the pressure sensor directly to the mask

«
...
20
21
22
23
24
...
»

Summary of Contents for SOMNO HD NGD050





















































Reviews:

No comments