SOMMY ER9 Series, Operation Manual

Page: 9 / 14

KKER9C02-A0-page 9
0 ～2
0 ～999.9
0 ～999.9
0 ～1
0
～99
0 ～99
0 ～68
0 ～2
0 ～999.9
0 ～999.9
0 ～999.9
0 ～10
0 ～1
0 ～999.9
0 ～999.9
0 ～999.9
0 ～1
0 ～99
0
～99
1
～32
1
/K/M
0 ～999.9
0
～999.9
0 ～3
0
～3
0 ～3
0 ～3
0 ～3
0 ～95
0 ～95
0
～95
0 ～95
0 ～95
select 12/24
set correct time
1 ～32
1 /K/M
0
～68
7
4
5
6
3
Mode
year month day hour minute second
1
2
3
7
8
1
2
3
7
8
Initial
8
Alarm Set
Alarm 1
Alarm 4
mode
unit
value
backlash
output
ON-DLY
OFF-DLY
When value is 0 , it is for remote control mode, otherwise it is for alarm mode. Please refer to table 1.
1: international standard unit, K: 1000 times standard unit, M: means1000000 times standard unit.
1st alarm value setting
1st alarm hysteresis value setting
1st alarm relay output setting
alarm start delay time , unit : second
alarm finish delay time , unit : second
mode
unit
value
backlash
output
ON-DLY
OFF-DLY
When value is 0 , it is for remote control mode, otherwise it is for alarm mode. Please refer to table 1.
1: international standard unit, K: 1000 times standard unit, M: means1000000 times standard unit.
4th alarm value setting
4th alarm hysteresis value setting
4th alarm relay output setting
alarm start delay time , unit : second
alarm finish delay time , unit : second
Trans Set
Please refer to table 1
Unit
High
Low
1: international standard unit, K: 1000 times standard unit, M: means1000000 times standard unit.
Transmit output 20mA
Transmit output 4mA
Trans 1
Trans 2
can be ordered
Please refer to table 1
Mode
Unit
High
Low
1: international standard unit, K: 1000 times standard unit, M: means1000000 times standard unit.
Transmit output 20mA
Transmit output 4mA
Time set
time mode Date-time
time mode 24 hours
Tariff Setting
tariff
start time
calibrate
Period 1 tariff means tine tariff, Peak tariff, flat tariff, vale tariff
Period 2 tariff means tine tariff, Peak tariff, flat tariff, vale tariff
Period 3 tariff means tine tariff, Peak tariff, flat tariff, vale tariff
Period 7 tariff means tine tariff, Peak tariff, flat tariff, vale tariff
Period 8 tariff means tine tariff, Peak tariff, flat tariff, vale tariff
Period 1 start time
Period 2 start time
Period 3 start time
Period 7 start time
Period 8 start time
System Set
Volt min
Cur. Min
Comm. delay
Energy Mode
set minimum value of voltage
set minimum value of current
set communication delay , unit:ms
energy calculation mode . 1 means primary calculation. 2 means secondary calculation
Extend 1
Extend 2
Extend 3
Extend 4
for spare
for spare
for spare
for spare
Clr. Kwh
Clr. Demand
reset to factory default setting
clear kwh
clear demand
Clr. Event clear event
password
factory setting , not opened
：
Divide 24 hours a day into 96 segments, every 15 minutes as one segments. For example, the corresponding time for segment 0 is 0 o'clock,
the corresponding time for segment 10 is 2:30. Please notice that, the setting of period 1 to period 12 should be from small to big.
Note