SOMFY YSLO FLEX RTS 1P, Installation Manual, Page: 15 / 28

Copyright © 2012 - 2014 Somfy SAS. All rights reserved.
Yslo Flex RTS 1P
15
4) Fit the chassis
g
on the second bracket while covering
the alignment rails.
5) Mark the holes of the chassis
g
on the lintel.
Keep it as parallel as possible to the pencil line before
making holes.
6) Remove the chassis
g
and drill holes.
7) Position the chassis
g
again on the bracket,
aligned with the mounting holes. Fix and tighten the
electromechanical module and the chassis with suitable
screws (make sure they are as parallel as possible to
the pencil line).
The anchors used must be able to withstand forces of
at least 40 kg. The mechanical module must be fixed in
at least two points.
Somfy recommends that you use screws with a
diameter of at least six millimetres.
The choice of the fixing method depends on the nature
of the support, and therefore, it will be under your sole
g
g
g