16
Copyright © 2017 Somfy SAS. All rights reserved.
EN
Images not contractually binding
2. 3. COMMISSIONING
1
$IWHU KDYLQJ DI¿[HG WKH UROOHU VKXWWHU WR WKH UROOHU
tube, check that when the roller shutter is in the lower
end limit position, the rigid link is correctly positioned
DQGWKDWWKH¿UVWVODWLVYHUWLFDOO\EHWZHHQWKHUXQQHUV
(as per F). If necessary, adjust the number of slats
used to improve the position of the rigid link when the
roller shutter is in the lower end limit position.
1
$OZD\V UHIHU WR WKH PDQXIDFWXUHUV VL]H DQG ZHLJKW
FKDUWVDQG¿WWLQJUHFRPPHQGDWLRQVIRUWKHULJLGOLQNV
to select those suited to the roller shutter used.
Use at least 2 rigid links to attach the roller shutter to the roller tube.
1)
Switch the power back on.
-
Press the "Up" button at the control point:
•
If the roller shutter rises, the wiring is correct and
FRPPLVVLRQLQJLV¿QLVKHG
•
,IWKHUROOHUVKXWWHULVORZHUHGJRWRWKHQH[WVWHS
2)
Switch off the power.
-
Reverse the brown wire and the black wire connected
to the control point.
3)
Switch the power back on.
-
Press the "Up" button to check the direction of rotation.
2. 4. TIPS AND RECOMMENDATIONS FOR INSTALLATION
2. 4. 1. Questions on the SOLUS P&P?
Problems
Possible causes
Solutions
The roller shutter is
turning in the wrong
direction.
The wiring is incorrect.
Check the wiring and modify it if
necessary.
The roller shutter is
not operational.
The wiring is incorrect.
Check the wiring and modify it if
necessary.
The drive is hot.
:DLWIRUWKHPRWRUWRFRROGRZQ
The control point is not
compatible.
Check for compatibility and replace the
control point if necessary.
The roller shutter
stops too soon.
The roller shutter is
encountering friction when
it moves: friction along
the runners and case,
interference between the
roller tube and the drive, etc.
Check the roller shutter installation and
correct any friction.
If the problem continues, restore the
GULYHWRLWVRULJLQDOFRQ¿JXUDWLRQ
The drive has been installed
in a new roller shutter.
Restore the drive to its original
FRQ¿JXUDWLRQVHHWKHVHFWLRQHQWLWOHG
5HVWRULQJWKHRULJLQDOFRQ¿JXUDWLRQ
The roller shutter
does not stop when
it reaches the lower
end limit position.
The mountings used are not
correct.
Check that the roller shutter is mounted
to the roller tube using rigid links.
F
F
1
2
3
ON
ON
OFF
OK
2
OK