7
Situo RTS
Copyright © 2008 Somfy SAS. All rights reserved.
5.1.2 Original control points
F
-
ind the original control point in the list
below and refer to the relevant para-
graph to add the new Situo RTS:
1) Control point fixed to the wall with
a single button, called a One-touch
point, see paragraph 5.2;
2) Control point fixed to the wall with
up/STOP/down buttons called a Point
with up/STOP/down buttons, see
paragraph 5.3;
3) Programmer type control point,
called a Timer, see paragraph 5.4;
4a) Telis 1 RTS remote control, see
paragraph 5.6
4b) Telis Soliris RTS remote control,
see paragraph 5.6;
5a) Telis 4 RTS remote controls, see
paragraph 5.7;
5b) Telis 4 Soliris RTS remote controls,
see paragraph 5.7.
5.2 One-touch point
Move close to the product to install the
new Situo RTS.
5.2.1 Identifying the model
Check that the original control point
-
has an elongated button.
Bring the product to the midway
-
position.
Remove the front cover from the one-
-
touch point:
One touch point with a white and grey front
cover
Gently remove the front cover with a
-
flat, pointed tool (such as a flathead
screwdriver) where the white
section and the grey section join.
Lever it and lift the cover, without
-
using force, to detach the mounting
lugs from the front cover.
1
2
3
4a
4b
5a
5b