10
Situo RTS
Copyright © 2008 Somfy SAS. All rights reserved.
Press the button again until the product
-
moves briefly (or emits a series of 3
beeps): the programming function
on the control point is activated for
approximately 2 minutes.
Take the front cover of the new Situo
-
RTS and turn it over to access the
PROG button (E).
-
Briefly press the PROG button (E) on
the new Situo RTS: the product will
again move briefly (or emit a series of
8 beeps) to indicate that the new Situo
RTS has been programmed.
-
Press the down button on the new
Situo RTS:
If the product is lowered, the Situo
-
RTS is operational.
If the product does not move, contact
-
the Somfy assistance service.
If the original control point must be dele-
-
ted, go to paragraph 5.2.3 "Deleting an
original control point".
If the original control point is to be kept,
-
refit the front cover:
One-touch point with a white and grey front
cover:
Insert the mounting lugs into their
-
notches on one side of the front
cover.
Press on the other side until it clicks,
-
to fit the front cover in its bracket.
Refer to the “Mounting the bracket”
-
section to finish installing the Situo
RTS.
One-touch point with a white front cover:
Refit the front cover on its bracket
-
Refer to the “Mounting the bracket”
-
section to finish installing the Situo
RTS.
E
