19
Situo RTS
Copyright © 2008 Somfy SAS. All rights reserved.
the programming function of the control
point is activated for approximately
2 minutes.
Take the front cover of the new Situo
-
RTS and turn it over to access the
PROG button (E).
-
Briefly press the PROG button (E) on
the new Situo RTS: the product will
again move briefly (or emit a series of
8 beeps) to indicate that the new Situo
RTS has been programmed.
-
Press the down button on the new
Situo RTS:
If the product is lowered, the Situo
-
RTS is operational.
If the product does not move, contact
-
the Somfy assistance service.
If the original Telis must be deleted, go
-
to paragraph 5.6.2 "Deleting the origi-
nal Telis".
If the original Telis is retained, please
-
refer to the “Mounting the bracket”
section to finish installing the Situo
RTS.
5.5.2 Deleting the original Telis
(optional)
N.B.: Only follow this procedure if use of
the original Telis is no longer required.
Warning! Before deleting a Telis Soliris,
contact the Somfy assistance service
to check the compatibility of the control
point with the product.
Wait 5 minutes.
-
-
Take the front cover of the new Situo
RTS and turn it over to access the
PROG button (E).
Press the PROG button (E) on the new
-
Situo RTS until the product moves brie-
E
E
