EN
Rollixo Optimo RTS
38
Copyright
©
2019 SOMFY ACTIVITES SA. All rights reserved.
Meaning of the different parameters [
Lighting output power:
• either 5 fluocompact or LED lights
• or 2 power supplies for low-voltage LEDs
• or 1 halogen light, max. 500 W
5.2.5
Video entry phone
> > > Illustration 19
5.2.6
Antenna
> > > Illustration 20
6
ADVANCED PARAMETER SETTING
6.1
Using the programming interface
> > > Illustration 21
1]
Press the “
SET
” button for 0.5 s to enter parameter setting mode.
ð
Indicator light P0 flashes once.
2]
Press the “
+
” or “
-
” button to change the value of the parameter.
ð
The indicator light flashes x times to indicate the value selected.
3]
Press the “
SET
” button for 0.5 s to confirm this value and move on to the next parameter.
ð
If parameter P3 is selected, pressing the “
SET
” button for 0.5 s will cause you to exit parameter
setting mode.
4]
Press the “
SET
” button for 2 s to confirm a value and exit parameter setting mode.
ð
The integrated lighting and parameter setting indicator lights go out.