FR
Rollixo Optimo RTS
20
Copyright
©
2019 SOMFY ACTIVITES SA. All rights reserved.
11 DIAGNOSTIC ET DÉPANNAGE
11.1 Etat des voyants
Eteint
Clignotement lent
Allumé fixe
Clignotement rapide
Clignotement très rapide
11.2 Diagnostic
Voyant POWER
Electronique en mode réglage moteur
→ Si nécessaire, vérifier le sens de rotation du moteur et régler les fins de course du moteur.
Produit réglé
Thermique moteur
→ Couper l'alimentation, attendre environ 5 min, remettre sous tension.
Voyant Cellules photoélectriques
Fonctionnement normal
• Détection en cours
→ Dès la fin de la détection, le voyant s'éteint.
• Défaut permanent
→ Vérifier l’alignement des cellules et leur câblage.
INFO! Après 3 min, l’entrée de commande filaire (bornes 20 et 21) permet de commander
la porte en homme mort.
Auto test en cours
→ Dès la fin de l'auto test, le voyant s'éteint.
Voyant Barre palpeuse
• Fonctionnement normal
• Si la barre palpeuse ne s’active pas lorsque la porte rencontre un obstacle à la ferme-
ture, il faut vérifier le sens de rotation moteur.
• Détection en cours
→ Dès la fin de la détection, le voyant s'éteint.
• Défaut permanent
→ Vérifier le câblage de la barre palpeuse.
INFO! Après 3 min, l’entrée de commande filaire (bornes 20 et 21) permet de commander
la porte en homme mort.
Auto test en cours
→ Dès la fin de l'auto test, le voyant s'éteint.