SOMFY N1841014 V2, Installation Manual, Page: 21 / 32

21
General parameters
The values indicated in grey correspond to factory settings.
Parameter displayed Operating modes Function Value displayed
P 0 Mode “On” Automatic
Semi-automatic
Blockage
Sequenced
Sequenced and Timed
3 Buttons
Forced via keyboard 0
1
2
3
4
5
6
P1 Time-delay With time-delay
Without time-delay
0
1
P2 1 or 2 motors 2 motors
1 motor 0
1
P3 Limit switch operating Without limit switch
With limit switch 0
1
A0 Activates opening safety device Stop
Total reversion
Partial reversion 0
1
2
A1 Activates closing 1 and 2 safety
device Stop
Total reversion
Partial reversion 0
1
2
A2 Autotest opening safety device Without autotest
With autotest 0
1
A3 Cell autotest by shutting down
power supply
On closing safety device 1 Without autotest
With autotest 0
1
A4 Cell autotest by shutting down
power supply
On closing safety device 2 Without autotest
With autotest 0
1
A5 Reflex or edge sensor cell autotest
On closing safety device 1 Without autotest
With autotest 0
1
A6 Reflex or edge sensor cell autotest
On closing safety device 2 Without autotest
With autotest 0
1
A7 DMAOP on entrance
closing safety device 1 Without DMAOP
With DMAOP 0
1
P4 Motor torque setting 1 Torque setting from 40 to 100% 00 to 10 ( 05 )
P5 Motor torque setting 2 Torque setting from 40 to 100% 00 to 10 ( 05 )
Complete list of parameters
GB