Copyright © 2018 SOMFY ACTIVITÉS SA, Société Anonyme. All rights reserved
.
Copyright © 2018 SOMFY ACTIVITÉS SA, Société Anonyme. All rights reserved
.
EN
7
3.1. OPEN AND CLOSE BUTTONS
(Fig 13)
Pressing the
Open
or
Close
button fully opens or closes the motorised product.
3.2. STOP FUNCTION
(Fig 14)
The motorised product is moving.
Briefly press
my
: the motorised product stops automatically.
3.3. FAVOURITE POSITION (
my
)
(Fig 15)
The motorised product is stopped.
Briefly press
my
: the motorised product starts to move, and stops in the favourite position (my).
To modify or delete the favourite (my) position, see the section entitled “Additional settings”
3.4. ADDITIONAL SETTINGS
3.4.1. Modifying the favourite position (my) (Fig 16)
1) Place the motorised product in the desired favourite position (my).
2) Press
my
for ≈ 5 seconds until the motorised product moves: the desired favourite position (my) has been
programmed.
3. USE AND MAINTENANCE
This drive is maintenance-free
2.4.2. Re-setting the end limits
Readjusting the Open end limit (Fig 9)
1) Press the
Open
button to move the motorised product to the end limit to be readjusted.
2) Press the
Open
and
Close
buttons of the RTS remote control simultaneously until the motorised
product moves. The LED is red.
3) Press the
Open
or
Close
button to move the motorised product to the new desired position.
4) To confirm the new end limit, press the
my
button until the motorised product moves.
Readjusting the Close end limit (Fig 10)
1) Press the
Close
button to move the motorised product to the end limit to be readjusted.
2) Press the
Open
and
Close
buttons of the RTS remote control simultaneously until the motorised
product moves. The LED is red blink.
3) Press the
Open
or
Close
button to move the motorised product to the new desired position.
4) To confirm the new end limit, press the
my
button until the motorised product moves.
2.4.3. Erasing the control point from the memory of the motor (Fig 11)
This reset deletes all the local remote control, however the end limit settings and favourite position are
retained.
To delete all the programmed remote control, use a pin to press and hold the button at bottom of the motor
until the motorised product moves twice.
All the remote controls are deleted.
2.4.4. Erasing the memory of the motor (Fig 12)
This reset deletes all remote control, all the sensors and all the end limit settings, and resets the motor’s favourite
position (my).
To reset the motor, use a pin to press and hold the button at bottom of the motor until the motorised product
moves 3 times.
All the settings are erased.
3.4.2. Deleting the favourite position (my) (Fig 17)
1) Press my: the motorised product starts to move, and stops in the favourite position (my).
2) Press my again until the motorised product moves: the favourite position (my) is deleted.
3.4.3. Adding/Deleting Somfy control points (Fig 18)
1) Find an RTS remote control programmed in the motor.
Press & hold the RTS programmed remote control (A) PROG button or the button on the bottom of the
motor until the motorised product moves, the motor is in programming mode.
2) Quickly press the RTS remote control (B) PROG button to add or delete, the motorised product moves &
the RTS remote control (B) is programmed or deleted from the motor.
3.4.4. Modifying the motor rotation direction (Fig 19)
Move the motorised product away from the end limits.
1) Press the
Open
and
Close
buttons of the RTS remote control simultaneously until the motorised product
moves.
the LED is green or green blink
2) Press the
my
button until the motorised product moves to reverse the rotation direction.
3.4.5. Low Battery Charge (Indicator)
1) Motor will emit one audiable “beep” ( one «beep» before motor start to run and another «beep» after
the operation )follow operation of Drapery motor.
Charge battery as per instructions 2.2.2 on previous page (or see Charging the Battery Pack).
2) motor will emit one «beep» and LED red fast blink when no battery.
Charge the battery as per instruction 2.2.2
3.5. TIPS AND RECOMMENDATIONS FOR USE
3.5.1. Questions about the Movelite
TM
WireFree?
If the motorised product still does not work, contact a motorisation and home automation professional.
3.5.2. Replacing a lost or broken Somfy remote control
To replace a lost or broken remote control, contact a Somfy motorisation and home automation professional.
4. TECHNICAL DATA
Somfy hereby declares that the drive covered by these instructions and used as intended
according to these instructions, is in compliance with the essential requirements of Directives
2006/42/EC, and 2014/53/EU.
A declaration of conformity detailing the standards and specifications used and stating all
particulars for identification of the drive, name and address of the person(s) authorised to compile the technical
file and empowered to draw up the declaration including place and date of issue is available at www.somfy.
com/ce.
Observations
Possible causes
Solutions
The motorised product
does not operate.
The remote control battery is weak.
Check whether the battery is weak and
replace it if necessary.
The battery pack is weak.
Check whether the battery pack is
weak and charge it.
Battery pack nominal voltage
14,8V
Battery pack continuous working current
2A
Radio frequency
433.42 MHz
Operating temperature
0°C to + 60°C
Index protection rating
IP 30
Safety level
Class III
Battery charging temperature
0°C to + 40°C
