SOMFY MAESTRIA Plus 50 io, Instructions Manual

Page: 24 / 28

24 Copyright © 2015 Somfy SAS. All rights reserved.
EN
Non contractual images
3. OPERATION AND MAINTENANCE
This drive does not require any maintenance operation.
3. 1. “UP” AND “DOWN” FUNCTIONS
-
 †` ? ˆ]‰ ˆƒ ‰ ‡ ?
product raises or lowers.
3. 2. STOP FUNCTION
The driven product is moving.
-
Press the “my” button: the driven product stops.
3. 3. FAVOURITE (MY) POSITION
A slightly open position, referred to as the “favourite (my) position”, other than the fully up
or fully down position, is programmed by default in the drive.
-
To activate this function, perform a complete up and
down cycle, all the way to the driven product’s upper
and lower end limits.
3. 3. 1. To modify the favourite (my) position:
1)
Set the driven product to the desired favourite (my)
position.
2)
Press the “my” button until the driven product moves
†`‡? < #`X
is programmed and the old favourite (my) position is
deleted.
Only one favourite position at the end limit positions is possible.
3. 3. 2. To use the favourite (my) position:
The driven product must be stopped.
-
Press the “my” button: the driven product moves to the
favourite (my) position.
3. 4. FABRIC TENSION
Fabric tensioning is possible only at the lower end limit with driven products equipped with
catches.
3. 4. 1. Driven product with automatic catches
Fabric tensioning is always active with a driven product equipped with automatic catches.
To draw the fabric taut
-
Press the “Down” button: the driven product lowers.
When it reaches the lower end limit, the driven product
raises automatically to draw the fabric taut.
If the fabric is drawn too tightly or not enough, consult a home motorisation and automation
professional to adjust the fabric tension.
To raise the driven product at the upper end limit
-
Press the “Up” button. The driven product starts by
moving downward to release tension on the fabric, then
raises to the upper end limit.
1) 2)
my
my
P1
P2
P1
P2