21
Copyright © 2015 Somfy SAS. All rights reserved.
EN
Non contractual images
B. FABRIC TENSIONING FUNCTION
This function is used to adjust the fabric tension of the driven product on 3 threshold levels
(strong-medium-weak).
By default, fabric tension level is set on medium.
-
To adjust the fabric tension:
1)
Place the driven product at its half-way position.
2)
Press the “my” and “Down” buttons simultaneously,
then immediately press and hold the “my” and “Down”
buttons simultaneously again until the driven product
`
The drive is now in set mode for
ten seconds
only.
3)
Adjust the fabric tension using the “Up” or “Down”
buttons:
-
To increase the tension on the fabric, press the “Up”
button until the driven product moves up and down slowly: the fabric tension of the driven
product passes to the upper threshold.
-
To decrease the tension on the fabric, press the “Down” button until the driven product
moves up and down slowly: the fabric tension passes to the lower threshold.
4)
To validate the setting, press the “my” button until the driven product moves up and down
`
2. 3. 6. "%"&
9 #X<? `<?<?
product are set.
A. PROGRAMMING OF THE PREPROGRAMMED SOMFY IO-HOMECONTROL® LOCAL CONTROL POINT
-
Press the PROG button of the preprogrammed control
point: the driven product performs a brief up and down
? `
B. PROGRAMMING OF A NON-PREPROGRAMMED CONTROL POINT
1)
Switch off the power supply (the pre-programmed
control point is deleted).
2)
Switch the mains power supply back on.
3)
Simultaneously press the “Up” and “Down” buttons of
the control point to be programmed until the driven
`
4)
Press the PROG button of this control point: the driven
product performs a brief up and down movement; the
control point is programmed.
1)
3)
4)
2)
PROG.
PROG.
1)
2)
3)
4)
OFF
ON
Summary of Contents for MAESTRIA Plus 50 io
Page 1: ...MAESTRIA 50 io Ref 5123562A l6 g m FR Notice DE Anleitung NL Handleiding EN Instructions...
Page 2: ......
Page 27: ......
