background image

 

©

2017 SOMFY ACTIVITÉS SA, 50 avenue du Nouveau Monde, 74300 Cluses, France REF. 5135987B – 2017-06-30 

Page 6/8

 

ETS parameter dialogue 

The following parameters can be set using the ETS.

 

 

General 

 

 

Local settings via menu 

By disabeling this option, it is no longer possible to change 

settings via the device menu. This includes setting the IP config-

uration, resetting the counters, the device reset, the bus reset, 

and temporarily changing the filter settings. 

Manual operation on device (bypass filtering)

 

The duration of the manual operating mode is set here. The filter 

table can be bypassed temporarily for commissioning or test 

purposes. This can be set under the menu item "Filter". After 

termination, the normal operating mode as programmed by ETS 

is automatically processed again. 

 

Routing (KNX TP -> IP) 

 

 

 

Group telegrams (main group 0 to 13) 

Main group 0 to 13 is the standard range of group addresses in 

ETS. 

Block:

 

No group telegrams of this main group are 

routed to IP. 

Route:

 

All group telegrams of this main group are 

routed to IP independent of the filter table. 

This setting is used for testing purposes on-

ly. 

Filter:

 

The filter table is used to check whether or 

not the received group telegram should be 

routed to IP. 

 

 

 

 

 

 

 

 
 

Group telegrams (main group 14 to 31) 

Main group 14 to 31 is the extended range of group addresses in 

ETS. 

Block:

 

No group telegrams of main groups 14 to 31 

are routed to IP. 

Route:

 

All group telegrams of main groups 14 to 31 

are routed to IP. 

Filter:

 

The filter table is used to check whether or 

not the received group telegram should be 

routed to IP. 

Individually addressed telegrams  

Individual addresses are used during a download. 

Block:

 

No individually addressed telegrams are 

routed to IP. 

Route: 

All individually addressed telegrams are 

routed to IP. 

Filter:

 

The individual address is used to check 

whether the received individually addressed 

telegram should be routed to IP. 

 

Broadcast telegrams 

Broadcast telegrams are used when assigning individual ad-

dresses. 

Block:

 

No received broadcast telegrams are routed 

to IP. 

Route:

 

All received broadcast telegrams are routed 

to IP. 

 
 

 

Summary of Contents for KNX IP LineMaster









Reviews: