13
EN
ILMO2 50 CSI WT
Copyright
©
2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
2.3. COMMISSIONING
Attention
• After having affixed the roller shutter to the roller tube,
check that when the roller shutter is in the lower end limit
position, the rigid link is correctly positioned and that the
first slat is vertically between the runners (as per F). If
necessary, adjust the number of slats used to improve the
position of the rigid link when the roller shutter is in the
lower end limit position.
• Always refer to the manufacturer's size and weight charts
and fitting recommendations for the rigid links to select
those suited to the roller shutter used.
• Due to the construction the shutter can be positioned beyond
the end limits of the motor when operated manually by
crank. Hence, a sufficient mechanical protection against
turning the tube too far beyond the endlimits must be
assured. Mechanical protection are e.g. robust stoppers for
the upper end limit and a sufficient quantity (minimum 5) of
rigid links.
1) Restore the mains power supply.
• Press the "Up" button at the control point:
- If the roller shutter rises, the wiring is correct and commis-
sioning is finished.
- If the roller shutter is lowered, go to the next step.
2) Switch off the power supply.
• Reverse the brown wire and the black wire connected to the
control point.
3) Restore the mains power supply.
• Press the "Up" button to check the direction of rotation.
2.4. TIPS AND ADVICE FOR INSTALLATION
2.4.1. Questions about the ILMO2 50 CSI WT?
Observations
Possible causes
Solutions
The motorised product
turns in the wrong
direction.
The wiring is incorrect.
Check the wiring and modify it if necessary.
The motorised product does
not work.
The wiring is incorrect.
Check the wiring and modify it if necessary.
The drive is in thermal protection mode.
Wait for the drive to cool down.
The control point is not compatible.
Check for compatibility and replace the
control point if necessary.
F
F
1
2
3
ON
ON
OFF
OK
2
OK
Summary of Contents for ilmo2 50 WT
Page 1: ...ILMO2 50 CSI WT Notice Instructions Anleitung Istruzioni FR EN DE IT...
Page 2: ......
Page 35: ......
