SOMFY Home Motion LEVIXO 30 RTS, Installation Instructions Manual

Page: 33 / 76

Copyright © 2011 Somfy SAS. All rights reserved.
13
EN
Levixo 30-50 RTS
8. ParamEtEr sEttiNG
9. ClEariNG all rEmotE CoNtrols
10. maiNtENaNCE
Potentiometers
: to modify the automatic closing time and the motor run time.
tCa :
Automatic
closing time
Between 0 and 90 seconds Setting the time delay for automatic closing (if
DIP1 is ON).
tW :
Motor run time
Between 0 and 120 seconds The motor run time should be slightly longer
than the actual closing time of the barrier.
diP switch : to select the operating mode for the motor and its additional devices.
1 :
Automatic
closing
ON: Activates automatic closing
off: deactivates automatic
closing
The barrier closes automatically after the
programmed time delay (TCA).
2 :
Operation of the
photoelectric
cells
ON: In closing mode only. In closing mode, the barrier stops then
reverses its movement.
In opening mode, the cells are inactive.
off: in opening and closing
mode.
in closing mode, the barrier stops and
reverses its movement once the cells are
no longer obstructed.
in opening mode, the barrier stops then
continues its movement once the cells are
no longer obstructed.
3 :
Blocking
impulses
ON: In opening mode only
off: None
Impulses during opening have no effect.
4 :
3 Step/4 Step
ON: Activates the 3 step logic. 3 STEP = operation in semi-automatic mode
(see “User's manual” p. 1).
off: activates the 4 step
logic.
4 stEP = operation in sequential mode (see
“user's manual” p. 1).
5
6
DIP 5 and 6 are not used and have no effect.
7 off: Compulsory position
8 off: Compulsory position
ON
EC
E
1
TC
A
+
+
-
-
TW
2
3
4
5
6
7
8
Press the PROG button of the control unit
(for more than 7 seconds) until the indicator
flashes.
All the remote controls and radio control points
are erased.
Before performing any operations inside the housing, it is essential to ensure that the spring is released by
moving the boom to the vertical position.
Lock the boom by placing the key in the padlock closed position .
Before carrying out work on the installation, switch off the power supply.
Clean the photoelectric cell optical units regularly.
>7s